| Heating block NANOCOLOR® VARIO C2 |
| Heating block of the future |
| Be safe | ||
 |
Constant digestion conditions • High temperature stability • Electronic overheating protection • Graphic display of heating curves |
|
 |
Maximum safety for the user • Extra strong safety covers as contact protection (10 mm, replaceable) on the heating block surface • Lockable protective lids • Display alert in case of open protective lid |
 |
| Meet specifications | |
| Internal quality control according to ISO 9001 • In conformance with requirements of internal quality control (IQC) • Comply with demands of supervisors and authorities • Heating curves to check temperature stability • Electronic temperature control and fully automatic calibration with the NANOCOLOR® T-Set (REF 919 917) • Comfortable data transfer via USB or serial interface RS 232 • Easy generation of quality certificates in accordance to GLP with the NANOCOLOR® T-Set software |
 |
 |
NANOCOLOR® T-Set Automatic temperature control and calibration of the heating blocks • Connect the RS 232 plug of the T-Set to the heating block • Place the temperature sensor into the small bore located on the safety cover |
 |
 |
 |
|
| Select „T-Set“ in the menu | Select the respective program | Start the program | |
| Universal thermometer for external temperature measurements • Connect the RS 232 plug of the T-Set to the heating block • Dip the temperature sensor into the respective sample solution • The temperature is displayed in the heating block’s display |
 |
|
 |
 |
|
| Save time |
| Intuitive operation • Convenient input via icons • Quick and easy selection of heating programs |
 |
 |
 |
 |
| Start screen | Temperature selection | Time selection | Program start |
 |
Time-saving procedures • Extremely short warm-up times (from 20 to 160 °C in just 10 minutes) • High-speed COD, total-Nitrogen, total-Phosphorous and total-Metals in just 30 minutes |
|
Self-explanatory user guidance • User-friendly, bright touch screen • Operation without time-consuming training |
| Experience flexibility | ||
 |
The ideal size for any purpose NANOCOLOR® VARIO C2: Simultaneous digestion of up to 12 samples |
|
 |
Standard programs and easy programming • 5 pre-programmed temperatures 70 / 100 / 120 / 148 / 160 °C • 4 pre-programmed heating times 30 min / 60 min / 120 min / cont. • 7 free memory locations between 40 -160 °C (1 °C increments) • 8 free memory locations between 0h:01min – 9h:59min (1min increments) |
|
| Suitable for all NANOCOLOR® digestion methods | ||
| Application | Temperature | Time |
| COD (DIN ISO 15705) | 148 °C | 120 min |
| High-speed COD | 160 °C | 30 min |
| TOC | 120 °C | 120 min |
| total-Nitrogen | 120 °C | 30 min |
| total-Phosphorous | 120 °C | 30 min |
| Organic acids | 100 °C | 10 min |
| total-Metals (Cadmium, Chromate, Iron, Cobalt, Copper, Nickel, Zinc) | 120 °C | 30 min |
| AOX | 120 °C | 30 min |
| Hydrocarbons | 148 °C | 120 min |
| Programmable, user-defined programs | 40 – 160 °C | 0h:01min – 9h:59min |
| Technical Data | |
 |
|
| Instrument: | NANOCOLOR® VARIO C2 |
| Type: | Programmable heating blocks for chemical-analytical digestions with 12 holes / for test tubes with 16 mm OD (outer diameter) / integrated protective lids |
| Display: | Coloured, backlit LCD touch screen |
| Operation: | Display menu guidance via touch screen |
| Temperatures: | 5 pre-programmed temperatures: 70 / 100 / 120 / 148 / 160 °C 7 free memory locations for individual temperature settings |
| Temperature range: | 40 – 160 °C (1 °C increments) |
| Temperature stability: | ± 1 °C (according to DIN, EN, ISO and EPA methods) |
| Warm-up time: | from 20 °C to 160 °C within 10 minutes |
| Heating times: | 4 pre-programmed heating times: 30 min / 60 min / 120 min / cont. 8 free memory locations for individual heating times |
| Time range: | 0h:01min – 9h:59min (increments 0h:01min) |
| Safety: | Replaceable safety covers as contact protection Lockable protective lids Overheating protection |
| Interfaces: | Bidirectional serial RS 232, USB A (master) and USB B (slave) |
| Analytical quality control: | With NANOCOLOR® T-Set (REF 919 917) optional fully automatic calibration and preparation of test certificates for instrument control and monitoring according to ISO 9001) |
| Update: | Via internet and USB stick |
| Power supply: | 110 – 230 V~, 50/60 Hz |
| Power consumption: | 125/250 VA |
| Dimensions (B x T x H): | 169 x 282 x 146 mm |
| Weight: | approx. 2.0 kg |
| Marking: | CE |
| Warranty: | 2 years |
 |
These instruments conform to the following directives: – 2006/95/EC – Low-Voltage Directive – 2004/108/EC – EMV Directive |
| Ordering information | |
| NANOCOLOR® VARIO C2 Heating block incl. protective lids, power line cord, USB cable, software-DVD, certificate and manual |
REF 919 350 |
| NANOCOLOR® T-Set Electronic temperature sensor incl. software-DVD, certificate and manual Quotation and Ordering สนใจขอใบเสนอราคาและสั่งซื้อสินค้า |
REF 919 917 |
